Amtac Blades

Quality fixed blade knives for combative and back country use.

fixed blade knives

Amtac Blades Magnacut Minuteman II

by Leave a Comment

**For all orders, your card must be charged to reserve your order.**

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

The Upgraded Magnacut Minuteman II features a 4-inch saber ground blade with a swedge starting 1.88 inches from the handle. This blade geometry allows for great thrusting ability and strength. The 1.3 inches of spine directly forward of the handle has a semi-sharp 90° angle to facilitate better striking of a ferro rod and other backcountry tasks. The handle of the Minuteman is 3 3/4 inches long.

The Minuteman II uses Magnacut steel which is significantly tougher than M390, is slightly better at corrosion resistance, and only sacrifices a small amount of edge retention as compared to M390. The Minuteman II will be slightly narrower than our regular Minuteman blade, the width is decreased by 1/8th of an inch.

The Minuteman blade is designed primarily for belt carry and comes standard with a low-profile belt sheath.

The blade and low-profile belt sheath are included. There is no trainer or storage sheath included.

This version includes marking on the spine and blade.

*Photos are a representation and actual product may contain slight variations in finish and appearance.

Amtac Blades Magnacut Minuteman II Sterile

by Leave a Comment

**For all orders, your card must be charged to reserve your order.**

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

The Upgraded Magnacut Minuteman II features a 4-inch partial saber ground blade with a swedge starting 1.88 inches from the handle. This blade geometry allows for great thrusting ability and strength. The 1.3 inches of spine directly forward of the handle has a semi-sharp 90° angle to facilitate better striking of a ferro rod and other backcountry tasks. The handle of the Minuteman is 3 3/4 inches long.

The Minuteman II uses Magnacut steel which is significantly tougher than M390, is slightly better at corrosion resistance, and only sacrifices a small amount of edge retention as compared to M390. The Minuteman II will be slightly narrower than our regular Minuteman blade, the width is decreased by 1/8th of an inch.

The Minuteman blade is designed primarily for belt carry and comes standard with a low-profile belt sheath.

The blade and low-profile belt sheath are included. There is no trainer or storage sheath included.

*Photos are a representation and actual product may contain slight variations in finish and appearance.

This sterile version does not include marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Asian Satinwood Handle 958

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance, and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is an Asian satinwood and the blade is machine satin finish.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included. 

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Black/Red G10 Handle 942

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is black/red G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Camo SureTouch Handle 946

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is camo SureTouch and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade and sheath of your choice is included. There is no trainer included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Camo SureTouch Handle 948

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is camo SureTouch and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Camo SureTouch Handle 948

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is camo SureTouch and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Charcoal Grey G10 Handle 931

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is charcoal grey G10 and the blade is regular stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included. 

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Charcoal Grey G10 Handle 931

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is charcoal grey G10 and the blade is regular stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade and sheath of your choice is included. There is no trainer included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Charcoal Grey G10 Handle 932

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is charcoal grey G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included. 

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Charcoal Grey/black G10 Handle 936

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is charcoal grey/black G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Charcoal Grey/Black G10 Handle 937

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is charcoal grey/black G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Coyote Brown G10 Handle 923

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is coyote brown G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Coyote Brown G10 Handle 934

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is coyote brown G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade and sheath of your choice is included. There is no trainer included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Coyote Brown G10 Handle 935

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is coyote brown G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.

Amtac Blades Custom Magnacut Northman Non-Serrated – Coyote Brown G10 Handle 947

by

*Amtac Shooting students use your Student Discount coupon to get $50 off or contact our team at AmtacShooting@gmail.com to request the student discount code if you are a student*

This version of the Amtac Blades Northman Non-Serrated is made from Magnacut steel. Magnacut steel is significantly tougher than M390, is slightly better at corrosion resistance and only sacrifices a small amount of edge retention as compared to M390.

The blade is 3/16 of an inch thick, which is thicker than our standard Northman Blades. The handle has no jimping. The handle material is coyote brown G10 and the blade is black stonewashed.

The Amtac Blades Northman is a small fixed-blade knife designed to replace the cutting tool carried in your pocket. Quickly deployable and rugged enough for backcountry use, this blade is also great for combatives.

The blade, trainer, and sheath of your choice is included.

Photos are of the actual product.

This un-serrated version includes marking on the spine and blade.